Skip to content
Surfhog home
Menu

Happisburgh wave buoy daily means for Sep 2012

Daily means from the Happisburgh wave buoy for Sep 2012, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,440 wave-buoy observations covered all 30 days. Typical wave height was 1.6 ft (10th–90th percentile 0.8–3.4 ft), while mean peak wave period was 6.4 seconds (10th–90th percentile 4.1–10 seconds). Mean water temperature was 16.1°C (10th–90th percentile 14–17.6°C). 5 of 5,760 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.6ft
Mean: 1.9 ft
P10–P90: 0.8 — 3.4 ft
Recorded extremes

0.4 — 8.7 ft

Mean Observed Wave Period

6.4secs
P10–P90: 4.1 — 10secs
Recorded extremes

2.2 — 13.3secs

Observed Wave Direction

NNE

Circular concentration: 87%

Mean Water Temperature

16.1°C
P10–P90: 14 — 17.6°C
Recorded extremes

13.7 — 17.9°C

Chart showing grouped wave observations for Happisburgh. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Happisburgh wave buoy

Happisburgh is a Channel Coastal Observatory wave station off the northeast Norfolk coast. It supplies a nearshore North Sea record for one of England's most rapidly changing soft-cliff frontages, where communities, beaches and coastal defences are exposed to frequent erosion.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Happisburgh wave buoy daily means Sep 2012Last observation shown
Metric
Mean significant wave height (ft)211122111122322112322445223121
Mean peak period (s)74445811975566676456776681186656
Mean zero-crossing period (s)533345444444545444554445454444
Mean peak wave directionNNEconcentration 96%NEconcentration 87%NNEconcentration 95%NNEconcentration 87%Nconcentration 95%NNEconcentration 99%NNEconcentration 98%NNEconcentration 90%NEconcentration 77%NEconcentration 79%Nconcentration 74%Nconcentration 100%Nconcentration 99%Nconcentration 95%Nconcentration 98%NNEconcentration 89%Nconcentration 97%Nconcentration 93%Nconcentration 98%NNEconcentration 99%Nconcentration 98%NNEconcentration 99%ENEconcentration 86%ENEconcentration 96%NNEconcentration 99%NEconcentration 98%Nconcentration 98%NNEconcentration 82%Nconcentration 91%NNEconcentration 83%
Mean directional spread (°)31.139.141.040.626.327.534.531.529.345.630.720.224.029.323.837.139.631.422.628.829.324.424.222.629.029.625.032.028.333.2
Mean water temperature(°C)17.317.217.317.417.417.417.417.617.717.717.617.417.016.716.516.316.216.015.715.315.114.814.614.414.114.114.114.113.913.8

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List