Skip to content
Surfhog home
Menu

Happisburgh wave buoy daily means for Nov 2022

Daily means from the Happisburgh wave buoy for Nov 2022, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,439 wave-buoy observations covered all 30 days. Typical wave height was 1.5 ft (10th–90th percentile 0.8–3.1 ft), while mean average of more than one wave period type was 6.4 seconds (10th–90th percentile 4.4–8.3 seconds). Mean water temperature was 11.4°C (10th–90th percentile 9.4–13.2°C). 5 of 5,732 checked values (0.1%) were excluded by quality control. Across 8 comparable years, mean wave height was below the same-month mean of 2.5 ft and mean wave period was below the same-month mean of 6.9 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.5ft
Mean: 1.8 ft
P10–P90: 0.8 — 3.1 ft
Recorded extremes

0.5 — 8.3 ft

Mean Observed Wave Period

6.4secs
P10–P90: 4.4 — 8.3secs
Recorded extremes

2.4 — 15.4secs

Observed Wave Direction

ENE

Circular concentration: 86%

Mean Water Temperature

11.4°C
P10–P90: 9.4 — 13.2°C
Recorded extremes

9.2 — 13.8°C

Compared With Previous Novembers

Historical baseline from 11,287 observations across 8 years.

Wave Height
1.8ft
0.7ft below mean
Historical mean 2.461ft
Wave Period
6.4s
0.5s below mean
Historical mean 6.9s
Water Temperature
11.4°C
1.5°C above mean
Historical mean 9.9°C

Chart showing grouped wave observations for Happisburgh. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Happisburgh wave buoy

Happisburgh is a Channel Coastal Observatory wave station off the northeast Norfolk coast. It supplies a nearshore North Sea record for one of England's most rapidly changing soft-cliff frontages, where communities, beaches and coastal defences are exposed to frequent erosion.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Happisburgh wave buoy daily means Nov 2022Last observation shown
Metric
Mean significant wave height (ft)2223211211111222QC rejected3QC rejected23222112111
Mean peak period (s)7675776765546566109877766557777
Mean zero-crossing period (s)444454444443344466545544444444
Mean peak wave directionEconcentration 99%ENEconcentration 62%Econcentration 92%Nconcentration 95%NEconcentration 84%Econcentration 99%Econcentration 98%Econcentration 100%ENEconcentration 82%ENEconcentration 88%Econcentration 96%Econcentration 97%ENEconcentration 86%ENEconcentration 99%Econcentration 94%Econcentration 92%ENEconcentration 92%NEconcentration 99%NEconcentration 100%NEconcentration 96%NEconcentration 85%ENEconcentration 94%ENEconcentration 86%Econcentration 94%ENEconcentration 81%ENEconcentration 89%Econcentration 99%ENEconcentration 86%NNEconcentration 97%NEconcentration 99%
Mean directional spread (°)24.831.527.724.527.329.732.224.132.339.834.233.432.222.222.225.725.027.323.123.923.629.728.333.434.934.323.540.933.925.0
Mean water temperature(°C)13.813.513.313.012.712.612.412.312.212.012.012.012.011.911.611.511.411.311.110.810.510.210.09.79.69.49.49.59.59.4

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List