Skip to content
Surfhog home
Menu

Hornsea wave buoy daily means for Nov 2020

Daily means from the Hornsea wave buoy for Nov 2020, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,429 wave-buoy observations covered all 30 days. Typical wave height was 2.1 ft (10th–90th percentile 1.4–3.9 ft), while mean average of more than one wave period type was 7.3 seconds (10th–90th percentile 2.9–13.3 seconds). Mean water temperature was 10.8°C (10th–90th percentile 9.9–11.3°C). 17 of 5,663 checked values (0.3%) were excluded by quality control. Across 10 comparable years, mean wave height was below the same-month mean of 3.4 ft and mean wave period was below the same-month mean of 7.8 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.1ft
Mean: 2.4 ft
P10–P90: 1.4 — 3.9 ft
Recorded extremes

0.8 — 10.1 ft

Mean Observed Wave Period

7.3secs
P10–P90: 2.9 — 13.3secs
Recorded extremes

1.8 — 20secs

Observed Wave Direction

E

Circular concentration: 48%

Mean Water Temperature

10.8°C
P10–P90: 9.9 — 11.3°C
Recorded extremes

9.8 — 11.7°C

Compared With Previous Novembers

Historical baseline from 14,209 observations across 10 years.

Wave Height
2.4ft
1ft below mean
Historical mean 3.412ft
Wave Period
7.3s
0.5s below mean
Historical mean 7.8s
Water Temperature
10.8°C
0.2°C above mean
Historical mean 10.6°C

Chart showing grouped wave observations for Hornsea. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Hornsea wave buoy

Hornsea is a Channel Coastal Observatory wave station off the rapidly eroding Holderness coast of East Yorkshire. Its North Sea record provides local wave context for Hornsea's defended frontage and the adjacent soft-cliff coastline, where storms drive substantial shoreline change.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Hornsea wave buoy daily means Nov 2020Last observation shown
Metric
Mean significant wave height (ft)332222222133333223QC rejectedQC rejected2223212222
Mean maximum wave height (ft)542333333244455334983334322333
Mean peak period (s)5436121185555554535410131315107711111354
Mean zero-crossing period (s)433466444433334333674333446443
Mean energy period (s)------------------------------
Mean wave power, kilowatts per metre------------------------------
Mean peak wave directionSEconcentration 98%SSWconcentration 72%SWconcentration 56%Nconcentration 77%NNEconcentration 100%NEconcentration 89%Econcentration 74%Econcentration 90%Econcentration 99%ENEconcentration 100%ESEconcentration 90%SEconcentration 95%SEconcentration 96%SEconcentration 99%SEconcentration 89%SWconcentration 77%SSEconcentration 59%SSEconcentration 64%NNEconcentration 75%NNEconcentration 100%NNEconcentration 100%NNEconcentration 100%NEconcentration 74%ESEconcentration 66%Econcentration 68%NNEconcentration 100%NNEconcentration 99%ENEconcentration 77%Econcentration 99%Variableconcentration 15%
Mean directional spread (°)16.420.122.621.918.015.917.918.516.718.417.718.919.418.620.922.124.422.718.016.221.728.322.917.617.122.915.027.320.121.7
Mean water temperature(°C)11.511.711.411.311.211.211.111.111.211.211.111.111.011.011.010.911.011.010.810.610.610.510.310.110.09.99.99.89.99.9

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List