Skip to content
Surfhog home
Menu

Hornsea wave buoy daily means for Jun 2020

Daily means from the Hornsea wave buoy for Jun 2020, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,436 wave-buoy observations covered all 30 days. Typical wave height was 2 ft (10th–90th percentile 1–4.5 ft), while mean average of more than one wave period type was 5.5 seconds (10th–90th percentile 3–9.6 seconds). Mean water temperature was 12.7°C (10th–90th percentile 11.7–13.9°C). 1 of 5,727 checked values (0%) were excluded by quality control. Across 10 comparable years, mean wave height was above the same-month mean of 2.1 ft and mean wave period was below the same-month mean of 6.5 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2ft
Mean: 2.4 ft
P10–P90: 1 — 4.5 ft
Recorded extremes

0.6 — 6.5 ft

Available for 718 of 719 hourly samples

Mean Observed Wave Period

5.5secs
P10–P90: 3 — 9.6secs
Recorded extremes

1.7 — 12.5secs

Available for 718 of 719 hourly samples

Observed Wave Direction

ENE

Circular concentration: 64%

Mean Water Temperature

12.7°C
P10–P90: 11.7 — 13.9°C
Recorded extremes

11.3 — 14.6°C

Available for 717 of 719 hourly samples

Compared With Previous Junes

Historical baseline from 13,997 observations across 10 years.

Wave Height
2.4ft
0.3ft above mean
Historical mean 2.133ft
Wave Period
5.5s
1s below mean
Historical mean 6.5s
Water Temperature
12.7°C
0.4°C above mean
Historical mean 12.3°C

Chart showing grouped wave observations for Hornsea. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Hornsea wave buoy

Hornsea is a Channel Coastal Observatory wave station off the rapidly eroding Holderness coast of East Yorkshire. Its North Sea record provides local wave context for Hornsea's defended frontage and the adjacent soft-cliff coastline, where storms drive substantial shoreline change.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Hornsea wave buoy daily means Jun 2020Last observation shown
Metric
Mean significant wave height (ft)223444443354322113212111222332
Mean maximum wave height (ft)324756665477532214322222233442
Mean peak period (s)55588871011957666534434343455436
Mean zero-crossing period (s)344554456444545433333333343333
Mean energy period (s)------------------------------
Mean wave power, kilowatts per metre------------------------------
Mean peak wave directionENEconcentration 98%Econcentration 99%NNEconcentration 91%NNEconcentration 100%NNEconcentration 100%NNEconcentration 98%NNEconcentration 100%NNEconcentration 100%NNEconcentration 100%NEconcentration 82%ENEconcentration 87%NEconcentration 100%NEconcentration 100%NEconcentration 100%NEconcentration 99%ENEconcentration 98%ENEconcentration 93%NEconcentration 95%ENEconcentration 65%SEconcentration 94%ESEconcentration 85%SEconcentration 86%SEconcentration 99%ESEconcentration 99%Econcentration 99%Econcentration 100%ESEconcentration 91%Sconcentration 76%SSWconcentration 93%Variableconcentration 27%
Mean directional spread (°)26.823.021.615.117.118.016.815.013.917.425.922.221.022.117.220.530.124.431.725.324.225.524.430.928.025.123.320.522.021.7
Mean water temperature(°C)12.312.512.312.111.911.711.511.511.711.811.811.812.212.312.712.612.712.712.813.013.113.313.513.814.014.114.114.013.913.7

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List