Skip to content
Surfhog home
Menu

Sandown Bay wave buoy daily means for Jan 2005

Daily means from the Sandown Bay wave buoy for Jan 2005, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,487 wave-buoy observations covered all 31 days. Typical wave height was 1.7 ft (10th–90th percentile 0.7–3.6 ft), while mean average of more than one wave period type was 6.6 seconds (10th–90th percentile 4.1–10.3 seconds). Mean water temperature was 8.5°C (10th–90th percentile 7.5–8.9°C). 12 of 5,902 checked values (0.2%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.7ft
Mean: 2 ft
P10–P90: 0.7 — 3.6 ft
Recorded extremes

0.3 — 6.1 ft

Available for 743 of 744 hourly samples

Mean Observed Wave Period

6.6secs
P10–P90: 4.1 — 10.3secs
Recorded extremes

1.7 — 22.2secs

Available for 741 of 744 hourly samples

Observed Wave Direction

SSE

Circular concentration: 88%

Mean Water Temperature

8.5°C
P10–P90: 7.5 — 8.9°C
Recorded extremes

7.2 — 9.1°C

Available for 743 of 744 hourly samples

Chart showing grouped wave observations for Sandown Bay. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Sandown Bay wave buoy

Sandown Bay is a Channel Coastal Observatory National Network wave station off the east coast of the Isle of Wight. Its nearshore record represents conditions entering the bay between Culver Down and Dunnose, helping monitor a developed and erosion-sensitive frontage exposed to English Channel seas.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Sandown Bay wave buoy daily means Jan 2005Last observation shown
Metric
Mean significant wave height (ft)2223224434321332322212311211111
Mean maximum wave height (ft)3325335656532443432423412321211
Mean peak period (s)87766569777106555614-565645555554
Mean zero-crossing period (s)4444444444444444444343434443443
Mean energy period (s)-------------------------------
Mean wave power, kilowatts per metre-------------------------------
Mean peak wave directionSconcentration 98%Sconcentration 99%Sconcentration 99%Sconcentration 100%Sconcentration 99%Sconcentration 100%Sconcentration 100%Sconcentration 100%Sconcentration 100%Sconcentration 99%Sconcentration 99%Sconcentration 99%Sconcentration 97%SSEconcentration 98%SSEconcentration 99%SSEconcentration 94%Sconcentration 99%Sconcentration 99%Sconcentration 98%SSWconcentration 96%Sconcentration 100%SSEconcentration 89%ESEconcentration 99%ESEconcentration 65%SEconcentration 99%SEconcentration 99%SEconcentration 97%SEconcentration 73%SEconcentration 99%SSEconcentration 93%SSEconcentration 96%
Mean directional spread (°)26.221.121.919.521.721.818.922.422.021.523.122.927.024.122.724.320.331.633.121.224.126.220.025.626.320.626.830.324.929.328.9
Mean water temperature(°C)9.08.88.88.88.88.88.98.98.99.09.08.98.88.88.88.88.88.78.78.88.88.68.37.97.77.57.67.77.57.47.4

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List