Skip to content
Surfhog home
Menu

Sandown Bay wave buoy daily means for Feb 2024

Daily means from the Sandown Bay wave buoy for Feb 2024, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,375 wave-buoy observations covered all 29 days. Typical wave height was 1.8 ft (10th–90th percentile 0.9–3.4 ft), while mean average of more than one wave period type was 7.3 seconds (10th–90th percentile 4–14.8 seconds). Mean water temperature was 8.7°C (10th–90th percentile 8.1–9.2°C). 18 of 5,473 checked values (0.3%) were excluded by quality control. Across 14 comparable years, mean wave height was below the same-month mean of 2.2 ft and mean wave period was below the same-month mean of 7.4 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.8ft
Mean: 2 ft
P10–P90: 0.9 — 3.4 ft
Recorded extremes

0.5 — 6.5 ft

Mean Observed Wave Period

7.3secs
P10–P90: 4 — 14.8secs
Recorded extremes

1.7 — 22.2secs

Available for 688 of 689 hourly samples

Observed Wave Direction

S

Circular concentration: 93%

Mean Water Temperature

8.7°C
P10–P90: 8.1 — 9.2°C
Recorded extremes

7.8 — 9.3°C

Compared With Previous Februarys

Historical baseline from 18,922 observations across 14 years.

Wave Height
2ft
0.2ft below mean
Historical mean 2.165ft
Wave Period
7.3s
0.1s below mean
Historical mean 7.4s
Water Temperature
8.7°C
1.3°C above mean
Historical mean 7.4°C

Chart showing grouped wave observations for Sandown Bay. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Sandown Bay wave buoy

Sandown Bay is a Channel Coastal Observatory National Network wave station off the east coast of the Isle of Wight. Its nearshore record represents conditions entering the bay between Culver Down and Dunnose, helping monitor a developed and erosion-sensitive frontage exposed to English Channel seas.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Sandown Bay wave buoy daily means Feb 2024Last observation shown
Metric
Mean significant wave height (ft)11222323312132212212322243112
Mean maximum wave height (ft)12233535523244222322544365223
Mean peak period (s)6655566568867667121015127810-76655
Mean zero-crossing period (s)43333344444443443444445544434
Mean energy period (s)-----------------------------
Mean wave power, kilowatts per metre-----------------------------
Mean peak wave directionSconcentration 99%Sconcentration 99%SSWconcentration 96%SSWconcentration 98%SSWconcentration 99%Sconcentration 100%SSEconcentration 89%SSEconcentration 89%Sconcentration 99%Sconcentration 97%Sconcentration 98%Sconcentration 98%Sconcentration 99%Sconcentration 99%SSEconcentration 95%Sconcentration 99%Sconcentration 98%Sconcentration 99%Sconcentration 99%Sconcentration 98%Sconcentration 99%Sconcentration 99%Sconcentration 99%Sconcentration 99%SSEconcentration 90%ESEconcentration 99%SEconcentration 98%Sconcentration 98%Sconcentration 99%
Mean directional spread (°)24.623.322.321.720.020.527.225.123.728.324.326.626.325.128.126.230.624.734.727.522.026.024.331.026.017.925.525.623.9
Mean water temperature(°C)7.97.98.18.28.28.58.78.68.78.78.78.78.78.88.99.09.09.29.29.29.29.29.19.08.98.78.68.78.8

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List