Skip to content
Surfhog home
Menu

Sandown Bay wave buoy observations on Thu, Aug 20, 2026

Hourly readings from the Sandown Bay wave buoy for Thu, Aug 20, 2026, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 1.7 ft (10th–90th percentile 1.3–2.1 ft), while mean peak wave period was 5.2 seconds (10th–90th percentile 3.4–6.3 seconds). Typical provider-reported wave power was 0.6 kW/m (10th–90th percentile 0.3–0.9 kW/m). Mean water temperature was 21.3°C (10th–90th percentile 21.3–21.4°C). All 192 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Sandown Bay. Use the detailed observations table below for the same data in text form.

About Sandown Bay wave buoy

Sandown Bay is a Channel Coastal Observatory National Network wave station off the east coast of the Isle of Wight. Its nearshore record represents conditions entering the bay between Culver Down and Dunnose, helping monitor a developed and erosion-sensitive frontage exposed to English Channel seas.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; hours run left to right. Times use your device time zone.
Sandown Bay wave buoy hourly observations Thu, Aug 20, 2026Last observation shown
Metric
Significant wave height (ft)111111122222222222222211112212222222222222222211
Maximum wave height (ft)222222223333333333232222222223334343343333322221
Peak period (s)555655666555666667665645222422665666666766666656
Zero-crossing period (s)333434333344444444444333323333333334444444444444
Energy period (s)444444444444555555555444333334444445555555555544
Wave power, kilowatts per metre0.20.260.240.280.290.360.410.430.50.580.690.70.730.850.830.740.660.60.620.570.580.510.370.260.220.320.380.390.310.490.60.710.780.760.840.951.031.01.190.980.980.90.850.660.60.510.40.27
Peak wave directionSSSWSSSSSSSSSSWSSSSSWSSSWSSWSSSSSWSSWSSWSWSSWSSWSSSSSWSSWSSSSSWSSWSSWSSSWSSSSSS
Directional spread (°)21.821.421.028.122.816.923.124.619.726.117.123.823.724.518.819.127.019.513.920.422.020.717.340.526.229.723.418.032.913.931.922.215.219.422.220.727.520.324.221.419.819.219.024.222.321.318.625.3
Water temperature(°C)21.421.421.421.521.521.421.421.421.421.421.421.421.421.421.321.321.321.321.321.321.321.321.321.321.421.421.421.421.421.421.421.421.421.421.421.421.421.421.421.421.421.321.321.321.321.321.321.3

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List