Skip to content
Surfhog home
Menu

Spurn Point wave buoy daily means for Oct 2025

Daily means from the Spurn Point wave buoy for Oct 2025, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

588 wave-buoy observations covered 13 of 31 days (42%). Typical wave height was 1.5 ft (10th–90th percentile 0.8–3.2 ft), while mean average of more than one wave period type was 6.5 seconds (10th–90th percentile 3.3–11.8 seconds). Mean water temperature was 14°C (10th–90th percentile 13.4–14.6°C). 7 of 2,099 checked values (0.3%) were excluded by quality control. Across 1 comparable year, mean wave height was below the same-month mean of 2.4 ft and mean wave period was below the same-month mean of 7.3 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.5ft
Mean: 1.8 ft
P10–P90: 0.8 — 3.2 ft
Recorded extremes

0.5 — 5 ft

Available for 254 of 295 hourly samples

Mean Observed Wave Period

6.5secs
P10–P90: 3.3 — 11.8secs
Recorded extremes

1.7 — 14.3secs

Available for 253 of 295 hourly samples

Observed Wave Direction

E

Circular concentration: 42%

Mean Water Temperature

14°C
P10–P90: 13.4 — 14.6°C
Recorded extremes

12.8 — 14.8°C

Compared With Previous Octobers

Historical baseline from 1,485 observations across 1 year.

Wave Height
1.8ft
0.6ft below mean
Historical mean 2.362ft
Wave Period
6.5s
0.8s below mean
Historical mean 7.3s
Water Temperature
14°C
1.3°C above mean
Historical mean 12.7°C

Chart showing grouped wave observations for Spurn Point. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Spurn Point wave buoy

Spurn Point is a Channel Coastal Observatory wave station off the narrow spit at the mouth of the Humber. It records North Sea conditions beside a highly mobile coastal landform and provides context for the estuary entrance, nearby shipping routes and the exposed southern Holderness coast.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Spurn Point wave buoy daily means Oct 2025Last observation shown
Metric
Mean significant wave height (ft)12333211112--------------------
Mean peak period (s)44541095461211--------------------
Mean zero-crossing period (s)33435533345--------------------
Mean peak wave directionSEconcentration 94%SEconcentration 95%SEconcentration 94%Wconcentration 88%NEconcentration 68%ENEconcentration 98%Variableconcentration 26%Variableconcentration 30%Variableconcentration 6%ENEconcentration 99%NNEconcentration 98%--------------------
Mean directional spread (°)27.425.121.826.128.433.341.546.348.344.321.7--------------------
Mean water temperature(°C)14.614.614.614.313.913.813.913.813.713.713.613.413.2------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List