Skip to content
Surfhog home
Menu

Brittany wave buoy observations on Fri, Aug 22, 2014

Hourly readings from the Brittany wave buoy for Fri, Aug 22, 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

24 wave-buoy observations were recorded during the day. Typical wave height was 3.9 ft (10th–90th percentile 2.8–4.5 ft), while mean reported wave period; measurement type unavailable was 4.5 seconds (10th–90th percentile 4–5 seconds). Typical wind was 13.9 mph (10th–90th percentile 11.4–16.1 mph) and mean water temperature was 18.6°C (10th–90th percentile 18.5–18.7°C). 27 of 120 checked values (22.5%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Brittany. Use the detailed observations table below for the same data in text form.

About Brittany wave buoy

Brittany buoy (WMO 62163) is maintained jointly by the UK Met Office and Météo-France in the Bay of Biscay. Its exposed position west of Brittany monitors Atlantic conditions approaching western France and the western entrance to the English Channel. The international feed can include wind, pressure, temperature and wave observations when available.

Metrics are rows; hours run left to right. Times use your device time zone.
Brittany wave buoy hourly observations Fri, Aug 22, 2014Last observation shown
Metric
Wave height (ft)33333344444455QC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejected4
Observed period(s)4Reported5Reported4Reported4Reported4Reported4Reported4Reported4Reported5Reported5Reported5Reported5Reported5Reported5ReportedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejected5Reported
Wave power(kW/m)------------------------
Wind directionNWWWWNWWNWWNWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNW
Wind speed (mph)1581314151111111723815161516151414131314111311
Water temperature(°C)18.718.718.518.618.618.518.618.618.618.518.518.518.618.6QC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejectedQC rejected18.7

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the UK Met Office.

› Wave Buoy List