Skip to content
Surfhog home
Menu

Chapel Point wave buoy daily means for Feb 2021

Daily means from the Chapel Point wave buoy for Feb 2021, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,329 wave-buoy observations covered all 28 days. Typical wave height was 3 ft (10th–90th percentile 0.8–6.2 ft), while mean average of more than one wave period type was 6.1 seconds (10th–90th percentile 3.5–9.2 seconds). Mean water temperature was 4.2°C (10th–90th percentile 3.3–4.9°C). 9 of 5,286 checked values (0.2%) were excluded by quality control. Across 8 comparable years, mean wave height was above the same-month mean of 2.9 ft and mean wave period was below the same-month mean of 6.5 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3ft
Mean: 3.4 ft
P10–P90: 0.8 — 6.2 ft
Recorded extremes

0.5 — 11.4 ft

Mean Observed Wave Period

6.1secs
P10–P90: 3.5 — 9.2secs
Recorded extremes

1.8 — 18.2secs

Available for 669 of 670 hourly samples

Observed Wave Direction

E

Circular concentration: 60%

Mean Water Temperature

4.2°C
P10–P90: 3.3 — 4.9°C
Recorded extremes

2.9 — 5.8°C

Compared With Previous Februarys

Historical baseline from 9,615 observations across 8 years.

Wave Height
3.4ft
0.5ft above mean
Historical mean 2.854ft
Wave Period
6.1s
0.4s below mean
Historical mean 6.5s
Water Temperature
4.2°C
0.9°C below mean
Historical mean 5.1°C

Chart showing grouped wave observations for Chapel Point. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Chapel Point wave buoy

Chapel Point is a Channel Coastal Observatory wave station off the Lincolnshire coast near Chapel St Leonards. Its shallow North Sea setting records conditions approaching a low-lying, heavily managed sandy frontage north of Skegness, supporting flood and erosion monitoring.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Chapel Point wave buoy daily means Feb 2021Last observation shown
Metric
Mean significant wave height (ft)3434459965355522233311231111
Mean maximum wave height (ft)565668151398578833355521442111
Mean peak period (s)66898899766675533544584464810
Mean zero-crossing period (s)5456556655444443333334333355
Mean energy period (s)----------------------------
Mean wave power, kilowatts per metre----------------------------
Mean peak wave directionENEconcentration 99%Econcentration 98%NEconcentration 98%NEconcentration 100%NEconcentration 99%NEconcentration 100%ENEconcentration 100%ENEconcentration 100%NEconcentration 99%NEconcentration 100%ENEconcentration 93%Econcentration 97%Econcentration 99%SEconcentration 93%SEconcentration 80%Sconcentration 98%Sconcentration 99%SEconcentration 84%Sconcentration 99%SSEconcentration 92%Econcentration 88%NEconcentration 86%SSEconcentration 88%Sconcentration 99%ENEconcentration 31%NNEconcentration 96%NNEconcentration 100%NNEconcentration 98%
Mean directional spread (°)27.722.823.425.422.323.821.323.126.524.128.424.020.326.628.327.925.723.821.427.126.529.921.222.636.531.631.538.0
Mean water temperature(°C)4.54.54.54.64.74.74.64.64.34.13.93.73.53.33.13.23.33.53.74.14.34.24.34.74.95.15.25.3

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List