Skip to content
Surfhog home
Menu

Dawlish wave buoy daily means for Feb 2011

Daily means from the Dawlish wave buoy for Feb 2011, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,342 wave-buoy observations covered all 28 days. Typical wave height was 2.1 ft (10th–90th percentile 1.1–4 ft), while mean average of more than one wave period type was 8.6 seconds (10th–90th percentile 3.8–15.4 seconds). Mean water temperature was 8.3°C (10th–90th percentile 7–8.8°C). 41 of 5,262 checked values (0.8%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.1ft
Mean: 2.4 ft
P10–P90: 1.1 — 4 ft
Recorded extremes

0.6 — 8.1 ft

Available for 670 of 671 hourly samples

Mean Observed Wave Period

8.6secs
P10–P90: 3.8 — 15.4secs
Recorded extremes

2 — 22.2secs

Available for 666 of 671 hourly samples

Observed Wave Direction

SSE

Circular concentration: 94%

Mean Water Temperature

8.3°C
P10–P90: 7 — 8.8°C
Recorded extremes

5.5 — 9.6°C

Available for 669 of 671 hourly samples

Chart showing grouped wave observations for Dawlish. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Dawlish wave buoy

Dawlish is a Channel Coastal Observatory National Network wave station in the western part of Lyme Bay off south Devon. It provides nearshore context for waves reaching the Dawlish and Teignmouth frontage, including the exposed coastal railway and beaches backed by cliffs and urban development.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Dawlish wave buoy daily means Feb 2011Last observation shown
Metric
Mean significant wave height (ft)QC rejected22333323222QC rejected254323331212211
Mean maximum wave height (ft)1335555343338386445442223322
Mean peak period (s)1396444695118176121010856951261311131212
Mean zero-crossing period (s)3344444444455454435444343343
Mean energy period (s)----------------------------
Mean wave power, kilowatts per metre----------------------------
Mean peak wave directionSconcentration 98%Sconcentration 99%Sconcentration 98%Sconcentration 100%Sconcentration 100%Sconcentration 99%Sconcentration 99%SSEconcentration 96%SSEconcentration 99%SSEconcentration 99%Sconcentration 99%SSEconcentration 99%SSEconcentration 98%SSEconcentration 99%SSEconcentration 99%SSEconcentration 99%SSEconcentration 91%SEconcentration 92%SSEconcentration 98%SEconcentration 91%SEconcentration 97%Sconcentration 98%SSEconcentration 100%SSEconcentration 100%Sconcentration 99%Sconcentration 99%Sconcentration 71%SSEconcentration 84%
Mean directional spread (°)35.228.023.816.618.019.420.524.723.532.425.630.317.128.023.929.623.029.828.327.529.728.428.128.325.430.631.836.1
Mean water temperature(°C)6.26.76.97.47.88.18.28.28.38.48.68.58.78.48.58.38.48.58.68.58.58.58.89.08.98.88.78.7

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List