Skip to content
Surfhog home
Menu

Dawlish wave buoy daily means for Jun 2015

Daily means from the Dawlish wave buoy for Jun 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,440 wave-buoy observations covered all 30 days. Typical wave height was 1 ft (10th–90th percentile 0.5–3.1 ft), while mean average of more than one wave period type was 5.4 seconds (10th–90th percentile 2.5–10.5 seconds). Mean water temperature was 14.2°C (10th–90th percentile 12.8–15.8°C). 17 of 5,700 checked values (0.3%) were excluded by quality control. Across 4 comparable years, mean wave height was below the same-month mean of 1.5 ft and mean wave period was above the same-month mean of 5 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1ft
Mean: 1.4 ft
P10–P90: 0.5 — 3.1 ft
Recorded extremes

0.3 — 5.5 ft

Mean Observed Wave Period

5.4secs
P10–P90: 2.5 — 10.5secs
Recorded extremes

1.7 — 15.4secs

Available for 719 of 720 hourly samples

Observed Wave Direction

SSE

Circular concentration: 80%

Mean Water Temperature

14.2°C
P10–P90: 12.8 — 15.8°C
Recorded extremes

11.7 — 17.3°C

Compared With Previous Junes

Historical baseline from 5,751 observations across 4 years.

Wave Height
1.4ft
0.1ft below mean
Historical mean 1.476ft
Wave Period
5.4s
0.4s above mean
Historical mean 5s
Water Temperature
14.2°C
0.2°C below mean
Historical mean 14.4°C

Chart showing grouped wave observations for Dawlish. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Dawlish wave buoy

Dawlish is a Channel Coastal Observatory National Network wave station in the western part of Lyme Bay off south Devon. It provides nearshore context for waves reaching the Dawlish and Teignmouth frontage, including the exposed coastal railway and beaches backed by cliffs and urban development.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Dawlish wave buoy daily means Jun 2015Last observation shown
Metric
Mean significant wave height (ft)3QC rejected1111113342111111111111111112
Mean maximum wave height (ft)452222124563211111111111111213
Mean peak period (s)478844645776444547755743748575
Mean zero-crossing period (s)344433434444333433343333333333
Mean energy period (s)------------------------------
Mean wave power, kilowatts per metre------------------------------
Mean peak wave directionSconcentration 97%Sconcentration 99%Sconcentration 99%SSEconcentration 93%SSEconcentration 90%Sconcentration 96%SSEconcentration 83%ESEconcentration 92%ESEconcentration 96%ESEconcentration 100%ESEconcentration 100%SEconcentration 99%Sconcentration 99%SSEconcentration 83%ESEconcentration 95%SEconcentration 99%SSEconcentration 94%Sconcentration 61%SSEconcentration 35%SSEconcentration 75%Sconcentration 69%Sconcentration 49%SSEconcentration 76%Sconcentration 96%SSEconcentration 98%Sconcentration 99%Sconcentration 98%Sconcentration 99%SSEconcentration 99%SEconcentration 89%
Mean directional spread (°)21.624.028.630.425.324.928.623.719.216.617.120.723.832.029.125.028.033.631.430.229.631.326.727.129.124.627.323.328.626.7
Mean water temperature(°C)12.011.912.913.113.513.113.513.313.213.313.414.014.014.214.214.815.014.614.714.914.814.614.415.115.616.015.915.315.616.4

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List