Skip to content
Surfhog home
Menu

Nymindegab wave buoy monthly means for 2007

Monthly means from the Nymindegab wave buoy for 2007, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

15,765 wave-buoy observations covered 333 of 365 days (91%). Typical wave height was 3.8 ft (10th–90th percentile 1.4–8.5 ft), while mean average of more than one wave period type was 4.8 seconds (10th–90th percentile 3.5–6 seconds). 2 of 47,230 checked values (0%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.8ft
Mean: 4.5 ft
P10–P90: 1.4 — 8.5 ft
Recorded extremes

0.4 — 22.6 ft

Available for 7,892 of 7,895 hourly samples

Mean Observed Wave Period

4.8secs
P10–P90: 3.5 — 6secs
Recorded extremes

2.5 — 10.5secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 7,895 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 7,895 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; months run left to right.
Nymindegab wave buoy monthly means 2007Last observation shown
Metric
Mean significant wave height (ft)QC rejected443QC rejected3446364
Mean maximum wave height (ft)146762477106118
Mean average period (s)645544445455
Mean zero-crossing period (s)645434445455
Mean peak wave directionWNWconcentration 91%WNWconcentration 37%WNWconcentration 77%NWconcentration 92%NNWconcentration 98%WNWconcentration 61%Wconcentration 75%WNWconcentration 78%WNWconcentration 86%WNWconcentration 76%WNWconcentration 79%WNWconcentration 85%

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List