Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Aug 2007

Daily means from the Nymindegab wave buoy for Aug 2007, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,486 wave-buoy observations covered all 31 days. Typical wave height was 3.6 ft (10th–90th percentile 1.9–6.3 ft), while mean average of more than one wave period type was 4.3 seconds (10th–90th percentile 3.5–5.3 seconds). 1 of 4,453 checked values (0%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.6ft
Mean: 3.8 ft
P10–P90: 1.9 — 6.3 ft
Recorded extremes

1.1 — 9.4 ft

Available for 743 of 744 hourly samples

Mean Observed Wave Period

4.3secs
P10–P90: 3.5 — 5.3secs
Recorded extremes

3 — 6secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 744 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 744 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Aug 2007Last observation shown
Metric
Mean significant wave height (ft)4233322444423364642133234787446
Mean maximum wave height (ft)7465544887745610710643554571214137711
Mean average period (s)4444544444444454554344444565445
Mean zero-crossing period (s)4444433444443444554334444555445
Mean peak wave directionWNWconcentration 89%Wconcentration 97%NWconcentration 99%WSWconcentration 96%WNWconcentration 88%WNWconcentration 64%NWconcentration 68%NNWconcentration 99%NWconcentration 100%NWconcentration 100%NWconcentration 100%NWconcentration 84%WSWconcentration 99%WSWconcentration 96%SWconcentration 95%WSWconcentration 96%WNWconcentration 91%NWconcentration 98%WSWconcentration 98%WSWconcentration 88%Nconcentration 84%NNWconcentration 100%NWconcentration 100%NWconcentration 99%NWconcentration 95%WNWconcentration 97%NWconcentration 100%NWconcentration 100%NNWconcentration 100%WNWconcentration 95%WNWconcentration 99%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List