Skip to content
Surfhog home
Menu

Nymindegab wave buoy monthly means for 2010

Monthly means from the Nymindegab wave buoy for 2010, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

17,099 wave-buoy observations covered 361 of 365 days (99%). Typical wave height was 2.9 ft (10th–90th percentile 1.4–6.1 ft), while mean average of more than one wave period type was 4.3 seconds (10th–90th percentile 3.3–5.5 seconds). 2 of 51,259 checked values (0%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.9ft
Mean: 3.4 ft
P10–P90: 1.4 — 6.1 ft
Recorded extremes

0.1 — 15.9 ft

Available for 8,555 of 8,557 hourly samples

Mean Observed Wave Period

4.3secs
P10–P90: 3.3 — 5.5secs
Recorded extremes

2.3 — 8.6secs

Available for 8,556 of 8,557 hourly samples

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 8,557 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 8,557 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; months run left to right.
Nymindegab wave buoy monthly means 2010Last observation shown
Metric
Mean significant wave height (ft)333343344444
Mean maximum wave height (ft)546565567886
Mean average period (s)445444444554
Mean zero-crossing period (s)444444444444
Mean peak wave directionNNWconcentration 35%NWconcentration 50%WNWconcentration 82%WNWconcentration 75%NWconcentration 94%NWconcentration 95%WNWconcentration 72%WNWconcentration 77%WNWconcentration 45%Wconcentration 55%NWconcentration 68%NWconcentration 72%

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List