Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Dec 2010

Daily means from the Nymindegab wave buoy for Dec 2010, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,422 wave-buoy observations covered all 31 days. Typical wave height was 3.1 ft (10th–90th percentile 1.6–6.9 ft), while mean average of more than one wave period type was 4.4 seconds (10th–90th percentile 3.4–5.9 seconds). 1 of 4,249 checked values (0%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.1ft
Mean: 3.6 ft
P10–P90: 1.6 — 6.9 ft
Recorded extremes

1.1 — 14.1 ft

Available for 714 of 715 hourly samples

Mean Observed Wave Period

4.4secs
P10–P90: 3.4 — 5.9secs
Recorded extremes

2.9 — 7.6secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 715 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 715 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Dec 2010Last observation shown
Metric
Mean significant wave height (ft)3425453374QC rejected5323QC rejectedQC rejected2222244222221QC rejected
Mean maximum wave height (ft)6739786613820964512843444673434328
Mean average period (s)4444555465764445654543444443345
Mean zero-crossing period (s)3344455455754345654443443443334
Mean peak wave directionNNEconcentration 95%Nconcentration 99%NNWconcentration 97%WSWconcentration 87%WSWconcentration 96%WNWconcentration 98%WNWconcentration 97%NWconcentration 100%NWconcentration 100%WNWconcentration 97%NWconcentration 99%NWconcentration 100%NNWconcentration 97%Nconcentration 100%NWconcentration 84%WNWconcentration 83%NWconcentration 100%NWconcentration 100%NNWconcentration 96%NNWconcentration 82%Wconcentration 99%NNWconcentration 90%Nconcentration 99%Nconcentration 100%NNWconcentration 99%Wconcentration 74%WNWconcentration 91%SSWconcentration 70%Sconcentration 83%WSWconcentration 81%NWconcentration 97%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List