Skip to content
Surfhog home
Menu

M3 wave buoy daily means for Aug 2026

Daily means from the M3 wave buoy for Aug 2026, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Typical Wave Height

4.6ft
Mean: 4.7 ft
P10–P90: 4.6 — 5.1 ft
Recorded extremes

4.3 — 5.2 ft

Mean Wave Period

4.9secs
P10–P90: 4.5 — 5.4secs
Recorded extremes

4.5 — 5.5secs

Mean Water Temperature

18.9°C
P10–P90: 18.8 — 19°C
Recorded extremes

18.8 — 19°C

Typical Wind

NNW, 16.2mph
Mean: 16.3 mph
P10–P90: 12.4 — 19.3 mph
Recorded extremes

11.8 — 19.3 mph

Circular concentration: 97%

Chart showing grouped wave observations for M3. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About M3 wave buoy

M3 is an offshore data buoy in the Atlantic approaches (51.1300°N, 10.3300°W). It provides upstream observations of swell and storm conditions relevant to Ireland/UK marine forecasts. It typically measures wave height/period/direction plus basic meteorological variables.

Metrics are rows; days run left to right.
M3 wave buoy daily means Aug 2026Last observation shown
Metric
Mean wave height (ft)-------------555---------------
Mean observed period(s)-------------5Tavg5Tavg5Tavg---------------
Mean wave power(kW/m)-------------------------------
Mean wind direction-------------NNWconcentration 99%Nconcentration 97%Nconcentration 100%---------------
Mean wind speed (mph)-------------171519---------------
Mean water temperature(°C)-------------19.018.918.9---------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Met Éireann Irish Marine Data Buoy Observation Network.

› Wave Buoy List