Skip to content
Surfhog home
Menu

Penzance wave buoy observations on Fri, Aug 7, 2026

Hourly readings from the Penzance wave buoy for Fri, Aug 7, 2026, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

40 wave-buoy observations were recorded during the day. Typical wave height was 0.4 ft (10th–90th percentile 0.4–0.6 ft), while mean peak wave period was 5.3 seconds (10th–90th percentile 3.2–6.3 seconds). Typical provider-reported wave power was 0 kW/m (10th–90th percentile 0–0.1 kW/m). Mean water temperature was 17.8°C (10th–90th percentile 17.4–18.2°C). 3 of 160 checked values (1.9%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Penzance. Use the detailed observations table below for the same data in text form.

About Penzance wave buoy

Penzance is a Datawell Directional WaveRider station in Mount's Bay off west Cornwall. First deployed by the National Network in April 2007, it records the comparatively sheltered wave climate on the bay's western side. Available observations include wave height, period and direction, sea temperature and calculated wave power.

Metrics are rows; hours run left to right. Times use your device time zone.
Penzance wave buoy hourly observations Fri, Aug 7, 2026Last observation shown
Metric
Significant wave height (ft)1--------000000000000000000000001111110000000000
Observed period(s)5Tp--------6Tp5Tp6Tp7Tp6Tp6Tp6TpQC rejected6Tp5Tp6Tp5Tp6Tp6Tp6Tp5Tp6Tp5TpQC rejected5Tp5Tp2Tp6Tp2Tp2Tp2Tp4Tp7Tp7Tp13Tp4Tp4Tp6Tp5Tp6Tp6Tp5Tp3TpQC rejected
Wave power, kilowatts per metre0.07--------0.060.050.060.060.060.060.050.050.050.040.040.040.040.050.040.040.050.050.040.040.040.050.050.060.080.070.10.080.060.040.040.050.040.040.030.040.040.040.04
Wave directionS--------SSSSSSSSSSSSSSSSSSSSSSSSESSSWSSWSSESSSSSSSSSSESSESSSE
Water temperature(°C)17.5--------17.417.417.417.417.417.417.417.417.417.517.517.617.817.817.817.717.817.918.018.018.018.118.318.118.218.218.118.218.318.318.118.118.018.018.018.018.017.917.9

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

› Wave Buoy List