Skip to content
Surfhog home
Menu

Chesil wave buoy daily means for Feb 2009

Daily means from the Chesil wave buoy for Feb 2009, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,330 wave-buoy observations covered all 28 days. Typical wave height was 1.9 ft (10th–90th percentile 1.3–4.5 ft), while mean average of more than one wave period type was 11.8 seconds (10th–90th percentile 6.3–16.1 seconds). Mean water temperature was 7.2°C (10th–90th percentile 6.8–7.5°C). 25 of 5,222 checked values (0.5%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.9ft
Mean: 2.5 ft
P10–P90: 1.3 — 4.5 ft
Recorded extremes

0.6 — 11.7 ft

Available for 663 of 666 hourly samples

Mean Observed Wave Period

11.8secs
P10–P90: 6.3 — 16.1secs
Recorded extremes

2.9 — 22.2secs

Available for 661 of 666 hourly samples

Observed Wave Direction

SW

Circular concentration: 93%

Mean Water Temperature

7.2°C
P10–P90: 6.8 — 7.5°C
Recorded extremes

6.7 — 7.8°C

Available for 662 of 666 hourly samples

Chart showing grouped wave observations for Chesil. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Chesil wave buoy

Chesil is a Channel Coastal Observatory National Network wave station off Dorset's exposed Jurassic Coast. It records waves approaching Chesil Beach and the western side of Portland, providing a nearshore reference for the long shingle barrier and the communities and infrastructure behind it.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Chesil wave buoy daily means Feb 2009Last observation shown
Metric
Mean significant wave height (ft)324542235QC rejected433222222222211221
Mean maximum wave height (ft)54776334811644332233233222322
Mean peak period (s)9159121513997131191312121213141413181513121491111
Mean zero-crossing period (s)6745853457666754488854566335
Mean energy period (s)----------------------------
Mean wave power, kilowatts per metre----------------------------
Mean peak wave directionSconcentration 95%SSWconcentration 97%SSWconcentration 99%SSWconcentration 98%SWconcentration 98%SSWconcentration 88%SWconcentration 72%SWconcentration 87%SSWconcentration 98%SWconcentration 100%SWconcentration 100%SWconcentration 99%SWconcentration 97%SWconcentration 97%SWconcentration 98%SWconcentration 98%SWconcentration 95%SWconcentration 96%SWconcentration 92%SWconcentration 99%SSWconcentration 90%SSWconcentration 98%SSWconcentration 94%SWconcentration 97%SSWconcentration 91%SWconcentration 88%SSWconcentration 96%SWconcentration 93%
Mean directional spread (°)28.254.729.535.639.354.942.743.122.117.520.626.540.640.946.842.556.954.757.149.958.847.445.645.659.142.255.856.3
Mean water temperature(°C)7.77.67.37.17.27.16.96.86.96.96.96.86.86.96.97.07.17.27.37.37.37.37.37.37.37.47.47.5

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List