Skip to content
Surfhog home
Menu

Chesil wave buoy daily means for Oct 2016

Daily means from the Chesil wave buoy for Oct 2016, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,490 wave-buoy observations covered all 31 days. Typical wave height was 1.7 ft (10th–90th percentile 1–4.2 ft), while mean average of more than one wave period type was 8.3 seconds (10th–90th percentile 4.3–13.3 seconds). Mean water temperature was 15.4°C (10th–90th percentile 14.3–16.9°C). 9 of 5,895 checked values (0.2%) were excluded by quality control. Across 6 comparable years, mean wave height was below the same-month mean of 3.5 ft and mean wave period was above the same-month mean of 7.8 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.7ft
Mean: 2.1 ft
P10–P90: 1 — 4.2 ft
Recorded extremes

0.5 — 7.2 ft

Mean Observed Wave Period

8.3secs
P10–P90: 4.3 — 13.3secs
Recorded extremes

2.7 — 18.2secs

Observed Wave Direction

SSW

Circular concentration: 87%

Mean Water Temperature

15.4°C
P10–P90: 14.3 — 16.9°C
Recorded extremes

13.8 — 17.3°C

Compared With Previous Octobers

Historical baseline from 8,869 observations across 6 years.

Wave Height
2.1ft
1.4ft below mean
Historical mean 3.543ft
Wave Period
8.3s
0.5s above mean
Historical mean 7.8s
Water Temperature
15.4°C
0.2°C above mean
Historical mean 15.2°C

Chart showing grouped wave observations for Chesil. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Chesil wave buoy

Chesil is a Channel Coastal Observatory National Network wave station off Dorset's exposed Jurassic Coast. It records waves approaching Chesil Beach and the western side of Portland, providing a nearshore reference for the long shingle barrier and the communities and infrastructure behind it.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Chesil wave buoy daily means Oct 2016Last observation shown
Metric
Mean significant wave height (ft)4323322111112136542111222222112
Mean maximum wave height (ft)7435543211123259763222333332122
Mean peak period (s)68888791110108876576511151312711975611911
Mean zero-crossing period (s)4545566656455445444576566433545
Mean energy period (s)-------------------------------
Mean wave power, kilowatts per metre-------------------------------
Mean peak wave directionSWconcentration 100%SWconcentration 99%SSWconcentration 91%Sconcentration 93%Sconcentration 96%SSEconcentration 99%Sconcentration 91%SWconcentration 87%SWconcentration 85%SSWconcentration 81%Sconcentration 92%Sconcentration 74%SSEconcentration 97%Sconcentration 95%SSWconcentration 96%SWconcentration 99%SWconcentration 100%SWconcentration 98%SSWconcentration 98%SSWconcentration 85%SSWconcentration 91%SSWconcentration 86%Sconcentration 96%SSWconcentration 91%SWconcentration 99%SWconcentration 98%SWconcentration 99%SWconcentration 94%SSWconcentration 75%Sconcentration 98%Sconcentration 86%
Mean directional spread (°)21.135.841.028.729.230.638.760.362.463.351.642.933.334.327.922.220.921.846.160.257.454.733.848.142.840.230.536.562.739.854.2
Mean water temperature(°C)17.217.117.016.916.916.716.516.416.216.015.915.815.515.415.515.315.114.714.414.414.714.614.514.814.914.814.714.514.414.214.1

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List