Skip to content
Surfhog home
Menu

K5 wave buoy monthly means for 2020

Monthly means from the K5 wave buoy for 2020, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

8,689 wave-buoy observations covered 365 of 366 days (100%). Typical wave height was 10.2 ft (10th–90th percentile 5.2–21.7 ft), while mean reported wave period; measurement type unavailable was 7.4 seconds (10th–90th percentile 6–10 seconds). Typical wind was 18.3 mph (10th–90th percentile 8.1–33.3 mph) and mean water temperature was 10.7°C (10th–90th percentile 9.2–12.8°C). 53 of 43,444 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

10.2ft
Mean: 12.1 ft
P10–P90: 5.2 — 21.7 ft
Recorded extremes

2 — 43.3 ft

Available for 8,641 of 8,689 hourly samples

Mean Wave Period

7.4secs
P10–P90: 6 — 10secs
Recorded extremes

4 — 14secs

Available for 8,688 of 8,689 hourly samples

Mean Water Temperature

10.7°C
P10–P90: 9.2 — 12.8°C
Recorded extremes

8.6 — 14°C

Available for 8,688 of 8,689 hourly samples

Typical Wind

Variable, 18.3mph
Mean: 20 mph
P10–P90: 8.1 — 33.3 mph
Recorded extremes

0 — 56.4 mph

Circular concentration: 22%

Available for 8,685 of 8,689 hourly samples

Chart showing grouped wave observations for K5. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About K5 wave buoy

K5 (WMO 64045) is a UK Met Office buoy in the far North Atlantic west of Scotland. It provides observations from a sparsely monitored ocean area upstream of the Hebrides and northern UK waters. The international feed includes marine weather and sea-temperature observations, with wave and wind parameters present only when the relevant sensors are reporting.

Metrics are rows; months run left to right.
K5 wave buoy monthly means 2020Last observation shown
Metric
Mean wave height (ft)20201510878710111515
Mean observed period(s)9Reported9Reported8Reported7Reported7Reported6Reported6Reported6Reported7Reported7Reported8Reported8Reported
Mean wave power(kW/m)------------
Mean wind directionWSWconcentration 74%WSWconcentration 49%Wconcentration 46%Variableconcentration 7%Variableconcentration 13%NNEconcentration 36%Wconcentration 37%Variableconcentration 11%WSWconcentration 42%Variableconcentration 24%SWconcentration 39%Variableconcentration 10%
Mean wind speed (mph)282722181616171518202222
Mean water temperature(°C)9.39.39.29.510.411.212.513.112.511.410.19.6

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Realtime data displayed on this page is from the Met Office Marine observations.

› Wave Buoy List