Skip to content
Surfhog home
Menu

Porthleven wave buoy daily means for Oct 2017

Daily means from the Porthleven wave buoy for Oct 2017, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

369 wave-buoy observations covered 16 of 31 days (52%). Typical wave height was 2.5 ft (10th–90th percentile 1.5–5.2 ft), while the reported wave period averaged 9.8 seconds (10th–90th percentile 5–14 seconds). Mean water temperature was 14.6°C (10th–90th percentile 14.1–14.9°C). 10 of 1,476 checked values (0.7%) were excluded by quality control. Across 5 comparable years, mean wave height was below the same-month mean of 4 ft and mean wave period was below the same-month mean of 10.3 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.5ft
Mean: 3 ft
P10–P90: 1.5 — 5.2 ft
Recorded extremes

1.1 — 24.7 ft

Available for 367 of 369 hourly samples

Mean Observed Wave Period

9.8secs
P10–P90: 5 — 14secs
Recorded extremes

3 — 29secs

Available for 361 of 369 hourly samples

Observed Wave Direction

WSW

Circular concentration: 99%

Mean Water Temperature

14.6°C
P10–P90: 14.1 — 14.9°C
Recorded extremes

13.6 — 15.1°C

Compared With Previous Octobers

Historical baseline from 3,371 observations across 5 years.

Wave Height
3ft
1ft below mean
Historical mean 4ft
Wave Period
9.8s
0.5s below mean
Historical mean 10.3s
Water Temperature
14.6°C
0.3°C below mean
Historical mean 14.9°C

Chart showing grouped wave observations for Porthleven. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Porthleven wave buoy

Porthleven is a National Network Datawell Directional WaveRider off Cornwall's exposed south coast. First deployed in October 2011, it characterises waves approaching the Porthleven frontage from the western English Channel, where Atlantic swell can wrap around Land's End and meet locally generated seas.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Porthleven wave buoy daily means Oct 2017Last observation shown
Metric
Mean significant wave height (ft)6533424223QC rejected---------------22312
Mean maximum wave height (ft)-------------------------------
Mean peak period (s)-------------------------------
Mean zero-crossing period (s)-------------------------------
Mean energy period (s)-------------------------------
Mean reported period (s)912151291110119510---------------98999
Mean wave power, kilowatts per metre-------------------------------
Mean peak wave direction-------------------------------
Mean directional spread (°)-------------------------------
Mean reported wave directionSWconcentration 99%WSWconcentration 100%WSWconcentration 100%WSWconcentration 99%WSWconcentration 100%WSWconcentration 99%WSWconcentration 100%WSWconcentration 100%WSWconcentration 99%SWconcentration 99%SWconcentration 91%---------------WSWconcentration 100%SWconcentration 100%SWconcentration 100%WSWconcentration 100%WSWconcentration 100%
Mean water temperature(°C)14.914.914.814.714.814.714.714.714.814.814.8---------------14.414.214.214.114.1

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List