Skip to content
Surfhog home
Menu

St Mary's Sound wave buoy daily means for Feb 2017

Daily means from the St Mary's Sound wave buoy for Feb 2017, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

666 wave-buoy observations covered all 28 days. Typical wave height was 5.4 ft (10th–90th percentile 2.9–9.4 ft), while the reported wave period averaged 9.1 seconds (10th–90th percentile 6–13 seconds). Mean water temperature was 10.5°C (10th–90th percentile 10.3–10.7°C). 20 of 2,664 checked values (0.8%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

5.4ft
Mean: 6.1 ft
P10–P90: 2.9 — 9.4 ft
Recorded extremes

2 — 21.8 ft

Available for 663 of 666 hourly samples

Mean Observed Wave Period

9.1secs
P10–P90: 6 — 13secs
Recorded extremes

4 — 20secs

Available for 649 of 666 hourly samples

Observed Wave Direction

SW

Circular concentration: 58%

Mean Water Temperature

10.5°C
P10–P90: 10.3 — 10.7°C
Recorded extremes

10.2 — 10.8°C

Chart showing grouped wave observations for St Mary's Sound. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About St Mary's Sound wave buoy

St Mary's Sound station lies between St Mary's and St Agnes in the Isles of Scilly. The National Network first deployed a Datawell Directional WaveRider here in May 2014, establishing a nearshore record for an archipelago exposed to Atlantic swell and important to local navigation and coastal management.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
St Mary's Sound wave buoy daily means Feb 2017Last observation shown
Metric
Mean significant wave height (ft)7QC rejectedQC rejected75875785710653453334637786
Mean maximum wave height (ft)----------------------------
Mean peak period (s)----------------------------
Mean zero-crossing period (s)----------------------------
Mean reported period (s)812121111810138867877867131110891079109
Mean peak wave direction----------------------------
Mean directional spread (°)----------------------------
Mean reported wave directionSSWconcentration 92%SSWconcentration 99%SSWconcentration 99%SWconcentration 99%SWconcentration 96%SSWconcentration 83%SWconcentration 95%SWconcentration 68%SSEconcentration 60%SSEconcentration 92%Econcentration 54%Econcentration 99%ESEconcentration 95%SSEconcentration 92%SSWconcentration 96%WSWconcentration 89%SSWconcentration 87%SSWconcentration 93%Wconcentration 68%WNWconcentration 87%WNWconcentration 84%Wconcentration 82%WNWconcentration 81%WNWconcentration 80%SWconcentration 98%SWconcentration 86%SWconcentration 97%WSWconcentration 88%
Mean water temperature(°C)10.710.810.710.710.710.610.610.610.610.510.410.310.310.310.410.410.410.510.510.510.610.610.610.510.510.410.410.3

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List