Skip to content
Surfhog home
Menu

Chesil wave buoy daily means for Nov 2012

Daily means from the Chesil wave buoy for Nov 2012, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,440 wave-buoy observations covered all 30 days. Typical wave height was 2.9 ft (10th–90th percentile 1.2–7.4 ft), while mean average of more than one wave period type was 8 seconds (10th–90th percentile 4.6–10.9 seconds). Mean water temperature was 11.9°C (10th–90th percentile 11.7–12.3°C). 8 of 5,708 checked values (0.1%) were excluded by quality control. Across 2 comparable years, mean wave height was the same as the same-month mean of 3.8 ft and mean wave period was below the same-month mean of 8.9 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.9ft
Mean: 3.8 ft
P10–P90: 1.2 — 7.4 ft
Recorded extremes

0.7 — 14.5 ft

Available for 719 of 720 hourly samples

Mean Observed Wave Period

8secs
P10–P90: 4.6 — 10.9secs
Recorded extremes

3 — 15.4secs

Available for 717 of 720 hourly samples

Observed Wave Direction

SW

Circular concentration: 94%

Mean Water Temperature

11.9°C
P10–P90: 11.7 — 12.3°C
Recorded extremes

11 — 13°C

Available for 718 of 720 hourly samples

Compared With Previous Novembers

Historical baseline from 2,868 observations across 2 years.

Wave Height
3.8ft
0ft above mean
Historical mean 3.773ft
Wave Period
8s
0.9s below mean
Historical mean 8.9s
Water Temperature
11.9°C
0.9°C below mean
Historical mean 12.8°C

Chart showing grouped wave observations for Chesil. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Chesil wave buoy

Chesil is a Channel Coastal Observatory National Network wave station off Dorset's exposed Jurassic Coast. It records waves approaching Chesil Beach and the western side of Portland, providing a nearshore reference for the long shingle barrier and the communities and infrastructure behind it.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Chesil wave buoy daily means Nov 2012Last observation shown
Metric
Mean significant wave height (ft)66543232332432222167510641052111
Mean maximum wave height (ft)8986534355364332321011816861583222
Mean peak period (s)87789745668751111106106888119910118911
Mean zero-crossing period (s)555564344454466545565666664346
Mean energy period (s)------------------------------
Mean wave power, kilowatts per metre------------------------------
Mean peak wave directionSWconcentration 100%SWconcentration 100%SWconcentration 100%SWconcentration 99%SWconcentration 98%WSWconcentration 95%SWconcentration 98%SWconcentration 92%SWconcentration 92%SWconcentration 99%SWconcentration 94%SWconcentration 99%SWconcentration 99%SWconcentration 97%SWconcentration 93%SWconcentration 84%SSWconcentration 92%SSWconcentration 88%SWconcentration 99%SWconcentration 99%SWconcentration 98%SWconcentration 100%SWconcentration 100%SSWconcentration 94%SWconcentration 99%SWconcentration 100%SWconcentration 97%SSWconcentration 84%Sconcentration 88%SWconcentration 75%
Mean directional spread (°)18.418.118.920.929.639.023.731.631.622.837.627.328.148.346.948.137.147.120.319.616.716.913.622.214.914.647.350.254.463.3
Mean water temperature(°C)12.712.312.312.212.312.111.911.912.112.111.911.811.811.811.711.811.811.911.811.811.911.811.711.811.711.712.011.711.411.1

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List