Skip to content
Surfhog home
Menu

K2 wave buoy daily means for Apr 2014

Daily means from the K2 wave buoy for Apr 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

4 wave-buoy observations covered 1 of 30 days (3%). Typical wave height was 0 ft; wave-period data were unavailable. Typical wind was 0 mph. 4 of 16 checked values (25%) were excluded by quality control. Across 3 comparable years, mean wave height was below the same-month mean of 9.9 ft.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

0ft
Mean: 0 ft
P10–P90: 0 — 0 ft
Recorded extremes

0 — 0 ft

Mean Wave Period

-secs
P10–P90: - — -secs

Available for 0 of 4 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 4 hourly samples

Typical Wind

E, 0mph
Mean: 0 mph
P10–P90: 0 — 0 mph
Recorded extremes

0 — 0 mph

Circular concentration: 99%

Compared With Previous Aprils

Historical baseline from 2,158 observations across 3 years.

Wave Height
0ft
9.9ft below mean
Historical mean 9.9ft
Wave Period
–
Not enough comparable data
Historical mean 7s
Water Temperature
–
Not enough comparable data
Historical mean 11.7°C

Chart showing grouped wave observations for K2. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About K2 wave buoy

K2 (WMO 62081) is a UK Met Office buoy in the North Atlantic west of Ireland. It provides an upstream view of ocean weather and sea conditions before systems reach Ireland and the UK. The international station feed can include wind, pressure, air and sea temperature, and wave observations when the relevant sensors are reporting.

Metrics are rows; days run left to right.
K2 wave buoy daily means Apr 2014Last observation shown
Metric
Mean wave height (ft)---------------------------0--
Mean observed period(s)------------------------------
Mean wave power(kW/m)------------------------------
Mean wind direction---------------------------Econcentration 99%--
Mean wind speed (mph)------------------------------
Mean water temperature(°C)------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the UK Met Office.

› Wave Buoy List