Skip to content
Surfhog home
Menu

M2 wave buoy daily means for Apr 2003

Daily means from the M2 wave buoy for Apr 2003, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

720 wave-buoy observations covered all 30 days. Typical wave height was 3.3 ft (10th–90th percentile 1.3–6.2 ft), while mean zero-crossing wave period was 4.7 seconds (10th–90th percentile 4–6 seconds). Typical wind was 12.7 mph (10th–90th percentile 4.6–21.9 mph) and mean water temperature was 8.7°C (10th–90th percentile 8.5–9.1°C). 1 of 3,589 checked values (0%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.3ft
Mean: 3.5 ft
P10–P90: 1.3 — 6.2 ft
Recorded extremes

0.7 — 8.2 ft

Available for 716 of 720 hourly samples

Mean Observed Wave Period

4.7secs
P10–P90: 4 — 6secs
Recorded extremes

3 — 8secs

Available for 717 of 720 hourly samples

Typical Observed Wind

SE, 12.7mph
Mean: 13 mph
P10–P90: 4.6 — 21.9 mph
Recorded extremes

2.3 — 31.1 mph

Circular concentration: 34%

Available for 717 of 720 hourly samples

Mean Water Temperature

8.7°C
P10–P90: 8.5 — 9.1°C
Recorded extremes

8.3 — 9.8°C

Available for 719 of 720 hourly samples

Chart showing grouped wave observations for M2. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About M2 wave buoy

M2 (WMO 62091) is part of the Irish Marine Data Buoy Observation Network, managed by the Marine Institute in collaboration with Met Éireann. Moored in the Irish Sea east of Ireland, it provides open-water context for the busy, relatively enclosed waters between the Irish and British coasts.

Its current data source reports wave height, wave period, wave direction, directional spread, wind conditions and sea temperature.

Metrics are rows; days run left to right.
M2 wave buoy daily means Apr 2003Last observation shown
Metric
Mean significant wave height (ft)753222322311443224565224576544
Mean maximum wave height (ft)------------------------------
Mean peak period (s)------------------------------
Mean zero-crossing period (s)554444444445455645555445556665
Mean peak wave direction------------------------------
Mean wave direction------------------------------
Mean directional spread (°)------------------------------
Mean wind directionWconcentration 76%NWconcentration 94%WNWconcentration 81%NWconcentration 51%Nconcentration 72%Econcentration 78%Sconcentration 88%SSEconcentration 74%SSEconcentration 30%Econcentration 97%SSWconcentration 85%SSEconcentration 54%SEconcentration 95%Econcentration 85%SSEconcentration 84%ESEconcentration 57%Econcentration 98%Econcentration 98%ENEconcentration 99%ENEconcentration 96%ESEconcentration 82%SWconcentration 93%Econcentration 80%ESEconcentration 90%SSEconcentration 86%Sconcentration 98%SSWconcentration 98%SSWconcentration 50%SSWconcentration 80%SSWconcentration 98%
Mean wind speed (mph)251910118813761376151095121719201491014192319141415
Mean water temperature(°C)8.48.48.58.68.68.58.58.68.68.68.78.98.78.88.89.08.78.78.78.78.78.88.98.98.88.88.99.09.19.2

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Met Éireann Irish Marine Data Buoy Observation Network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List