Skip to content
Surfhog home
Menu

M2 wave buoy daily means for Feb 2006

Daily means from the M2 wave buoy for Feb 2006, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

661 wave-buoy observations covered all 28 days. Typical wave height was 4.6 ft (10th–90th percentile 1.6–7.5 ft), while mean zero-crossing wave period was 4.6 seconds (10th–90th percentile 4–6 seconds). Typical wind was 20.7 mph (10th–90th percentile 8.1–27.6 mph) and mean water temperature was 9.2°C (10th–90th percentile 8.7–9.6°C). All 3,305 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

4.6ft
Mean: 4.5 ft
P10–P90: 1.6 — 7.5 ft
Recorded extremes

1 — 10.8 ft

Mean Observed Wave Period

4.6secs
P10–P90: 4 — 6secs
Recorded extremes

3 — 7secs

Typical Observed Wind

Variable, 20.7mph
Mean: 19.1 mph
P10–P90: 8.1 — 27.6 mph
Recorded extremes

2.3 — 36.8 mph

Circular concentration: 6%

Mean Water Temperature

9.2°C
P10–P90: 8.7 — 9.6°C
Recorded extremes

8.3 — 9.7°C

Chart showing grouped wave observations for M2. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About M2 wave buoy

M2 (WMO 62091) is part of the Irish Marine Data Buoy Observation Network, managed by the Marine Institute in collaboration with Met Éireann. Moored in the Irish Sea east of Ireland, it provides open-water context for the busy, relatively enclosed waters between the Irish and British coasts.

Its current data source reports wave height, wave period, wave direction, directional spread, wind conditions and sea temperature.

Metrics are rows; days run left to right.
M2 wave buoy daily means Feb 2006Last observation shown
Metric
Mean significant wave height (ft)12212356526456674QC rejected3667588647
Mean maximum wave height (ft)----------------------------
Mean peak period (s)----------------------------
Mean zero-crossing period (s)4455444443545555564555455545
Mean peak wave direction----------------------------
Mean wave direction----------------------------
Mean directional spread (°)----------------------------
Mean wind directionSconcentration 97%SSEconcentration 89%NEconcentration 65%SSWconcentration 70%WSWconcentration 91%WSWconcentration 93%WSWconcentration 94%NWconcentration 96%Nconcentration 98%SEconcentration 72%SSWconcentration 98%SWconcentration 97%Sconcentration 98%SSWconcentration 93%SWconcentration 96%SWconcentration 92%WSWconcentration 81%Nconcentration 63%ENEconcentration 92%NNEconcentration 98%NEconcentration 95%Econcentration 98%NEconcentration 81%ENEconcentration 93%ENEconcentration 98%NEconcentration 99%NWconcentration 88%NNWconcentration 98%
Mean wind speed (mph)11118712152325181123152225252516617242427212928232028
Mean water temperature(°C)9.69.69.69.69.59.59.59.59.59.49.49.49.49.49.39.39.39.39.29.19.19.08.98.88.78.68.78.5

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Met Éireann Irish Marine Data Buoy Observation Network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List