Skip to content
Surfhog home
Menu

M2 wave buoy daily means for Dec 2007

Daily means from the M2 wave buoy for Dec 2007, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

731 wave-buoy observations covered all 31 days. Typical wave height was 5.9 ft (10th–90th percentile 3–8.9 ft), while mean zero-crossing wave period was 4.8 seconds (10th–90th percentile 4–6 seconds). Typical wind was 24.2 mph (10th–90th percentile 13.8–34.5 mph) and mean water temperature was 11.4°C (10th–90th percentile 10.7–12.3°C). 1 of 3,648 checked values (0%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

5.9ft
Mean: 5.9 ft
P10–P90: 3 — 8.9 ft
Recorded extremes

2 — 12.8 ft

Available for 729 of 731 hourly samples

Mean Observed Wave Period

4.8secs
P10–P90: 4 — 6secs
Recorded extremes

3 — 7secs

Available for 730 of 731 hourly samples

Typical Observed Wind

SW, 24.2mph
Mean: 24 mph
P10–P90: 13.8 — 34.5 mph
Recorded extremes

4.6 — 43.7 mph

Circular concentration: 57%

Available for 729 of 731 hourly samples

Mean Water Temperature

11.4°C
P10–P90: 10.7 — 12.3°C
Recorded extremes

10.5 — 12.5°C

Available for 730 of 731 hourly samples

Chart showing grouped wave observations for M2. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About M2 wave buoy

M2 (WMO 62091) is part of the Irish Marine Data Buoy Observation Network, managed by the Marine Institute in collaboration with Met Éireann. Moored in the Irish Sea east of Ireland, it provides open-water context for the busy, relatively enclosed waters between the Irish and British coasts.

Its current data source reports wave height, wave period, wave direction, directional spread, wind conditions and sea temperature.

Metrics are rows; days run left to right.
M2 wave buoy daily means Dec 2007Last observation shown
Metric
Mean significant wave height (ft)8866967776QC rejected78744654445564589835
Mean maximum wave height (ft)-------------------------------
Mean peak period (s)-------------------------------
Mean zero-crossing period (s)5555555555456544554454455566544
Mean peak wave direction-------------------------------
Mean wave direction-------------------------------
Mean directional spread (°)-------------------------------
Mean wind directionWSWconcentration 98%Wconcentration 79%WNWconcentration 95%SSWconcentration 95%SWconcentration 90%WSWconcentration 92%Wconcentration 98%SWconcentration 83%NWconcentration 71%NWconcentration 92%SSWconcentration 95%Sconcentration 100%Sconcentration 98%Sconcentration 100%SSEconcentration 96%SSEconcentration 99%ESEconcentration 93%Econcentration 88%Econcentration 96%SSEconcentration 91%Sconcentration 100%WSWconcentration 68%SSWconcentration 90%Wconcentration 71%WSWconcentration 81%SWconcentration 93%SSWconcentration 97%SSWconcentration 96%Wconcentration 95%WSWconcentration 91%SSWconcentration 99%
Mean wind speed (mph)32302628312232312823182730261719231918131521251819262732321724
Mean water temperature(°C)12.412.412.312.312.412.312.111.911.911.611.711.911.911.611.411.211.111.011.010.910.910.910.910.810.810.810.710.710.710.610.6

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Met Éireann Irish Marine Data Buoy Observation Network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List