Skip to content
Surfhog home
Menu

M2 wave buoy daily means for Mar 2013

Daily means from the M2 wave buoy for Mar 2013, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

743 wave-buoy observations covered all 31 days. Wave-height and wave-period data were unavailable. Typical wind was 17 mph (10th–90th percentile 7.5–26.4 mph) and mean water temperature was 7.5°C (10th–90th percentile 7.2–7.8°C). All 2,229 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

-ft
Mean: - ft
P10–P90: - — - ft

Available for 0 of 743 hourly samples

Mean Observed Wave Period

-secs
P10–P90: - — -secs

Available for 0 of 743 hourly samples

Typical Observed Wind

E, 17mph
Mean: 17 mph
P10–P90: 7.5 — 26.4 mph
Recorded extremes

0.2 — 35.2 mph

Circular concentration: 57%

Mean Water Temperature

7.5°C
P10–P90: 7.2 — 7.8°C
Recorded extremes

6.2 — 8°C

Compared With Previous Marchs

Historical baseline from 2,189 observations across 3 years.

Wave Height
–
Not enough comparable data
Historical mean 2.723ft
Wave Period
–
Not enough comparable data
Historical mean 5s
Water Temperature
7.5°C
0.7°C below mean
Historical mean 8.2°C

Chart showing grouped wave observations for M2. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About M2 wave buoy

M2 (WMO 62091) is part of the Irish Marine Data Buoy Observation Network, managed by the Marine Institute in collaboration with Met Éireann. Moored in the Irish Sea east of Ireland, it provides open-water context for the busy, relatively enclosed waters between the Irish and British coasts.

Its current data source reports wave height, wave period, wave direction, directional spread, wind conditions and sea temperature.

Metrics are rows; days run left to right.
M2 wave buoy daily means Mar 2013Last observation shown
Metric
Mean significant wave height (ft)-------------------------------
Mean maximum wave height (ft)-------------------------------
Mean peak period (s)-------------------------------
Mean zero-crossing period (s)-------------------------------
Mean peak wave direction-------------------------------
Mean wave direction-------------------------------
Mean directional spread (°)-------------------------------
Mean wind directionENEconcentration 90%NNWconcentration 91%SSWconcentration 58%SEconcentration 47%NEconcentration 91%Econcentration 98%Econcentration 100%ESEconcentration 98%Econcentration 99%Econcentration 99%ENEconcentration 98%Nconcentration 89%Nconcentration 96%Wconcentration 71%SWconcentration 94%NNWconcentration 88%WNWconcentration 47%ENEconcentration 96%ENEconcentration 95%SEconcentration 94%ESEconcentration 98%ESEconcentration 99%ESEconcentration 98%Econcentration 99%Econcentration 100%Econcentration 99%Econcentration 96%Econcentration 98%ESEconcentration 97%ESEconcentration 98%SEconcentration 97%
Mean wind speed (mph)97679161918212826181813159111611142328262725211917171418
Mean water temperature(°C)7.97.87.77.77.77.77.67.57.67.87.77.67.57.37.37.37.47.57.57.37.57.57.37.37.67.77.87.77.27.16.7

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Met Éireann Irish Marine Data Buoy Observation Network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List