Skip to content
Surfhog home
Menu

Perranporth wave buoy observations on Thu, May 21, 2020

Hourly readings from the Perranporth wave buoy for Thu, May 21, 2020, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 3.9 ft (10th–90th percentile 2.7–4.2 ft), while mean average of more than one wave period type was 10.3 seconds (10th–90th percentile 9.6–10.9 seconds). Mean water temperature was 13.4°C (10th–90th percentile 13.2–14.1°C). All 188 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Perranporth. Use the detailed observations table below for the same data in text form.

About Perranporth wave buoy

Perranporth is a National Network Datawell Directional WaveRider in about 14 metres of water off Cornwall's exposed north coast. First deployed on 18 December 2006, it records Atlantic swell approaching Perranporth and neighbouring beaches; a separate shore station supplies the local weather context.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; hours run left to right. Times use your device time zone.
Perranporth wave buoy hourly observations Thu, May 21, 2020Last observation shown
Metric
Significant wave height (ft)4344454444444444444-4444444444444433333333332333
Maximum wave height (ft)565667566766676666667566767776655656755444444444
Peak period (s)111010101111121111111110101111101110--1012101010128111012129101011108111110119101111999
Zero-crossing period (s)877767677666777776--8887777776667776776766776554
Energy period (s)------------------------------------------------
Reported period (s)11-10-11-12-11-11-10-11-11-10-10-10-10-8-10-12-10-11-8-11-11-10-11-9-
Wave power, kilowatts per metre------------------------------------------------
Peak wave directionWNWWWWWWWWWWWWWNWWWWNWWWNW--WSWNWWWWWWWNWWWWWWWWNWWNWWSWWWNWWWWWWWNWWWW
Directional spread (°)14.022.017.016.030.024.021.027.025.035.037.036.030.030.039.025.035.027.0--69.020.030.018.020.011.016.022.026.024.040.035.029.030.029.025.032.037.030.035.025.036.032.022.020.023.032.031.0
Reported wave directionWNW-W-W-W-W-W-WNW-W-W-WNW-WSW-W-W-W-W-W-W-WNW-WSW-WNW-W-W-WNW-W-
Water temperature(°C)13.213.213.213.113.113.113.213.313.313.313.213.213.213.113.113.113.213.213.2-13.814.413.613.813.814.414.314.114.013.914.113.913.913.413.413.413.313.313.213.213.213.213.213.213.313.313.213.2

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List