Skip to content
Surfhog home
Menu

Seaford wave buoy daily means for Sep 2014

Daily means from the Seaford wave buoy for Sep 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

720 wave-buoy observations covered all 30 days. Typical wave height was 0.8 ft (10th–90th percentile 0.5–1.9 ft), while the reported wave period averaged 6.7 seconds (10th–90th percentile 3–13 seconds). Mean water temperature was 18.2°C (10th–90th percentile 17.9–18.5°C). 21 of 2,880 checked values (0.7%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

0.8ft
Mean: 1 ft
P10–P90: 0.5 — 1.9 ft
Recorded extremes

0.3 — 4.4 ft

Mean Observed Wave Period

6.7secs
P10–P90: 3 — 13secs
Recorded extremes

2 — 20secs

Available for 699 of 720 hourly samples

Observed Wave Direction

SSW

Circular concentration: 71%

Mean Water Temperature

18.2°C
P10–P90: 17.9 — 18.5°C
Recorded extremes

17.7 — 19°C

Chart showing grouped wave observations for Seaford. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Seaford wave buoy

Seaford is a National Network Datawell Directional WaveRider in about 11 metres of water off East Sussex. First deployed on 22 January 2008, it records waves reaching Seaford Bay between Newhaven and Beachy Head and supports assessment of the town's exposed shingle frontage.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Seaford wave buoy daily means Sep 2014Last observation shown
Metric
Mean significant wave height (ft)211101011111111111111112231112
Mean maximum wave height (ft)------------------------------
Mean peak period (s)------------------------------
Mean zero-crossing period (s)------------------------------
Mean energy period (s)------------------------------
Mean reported period (s)4131277754444465456687151454557974
Mean wave power, kilowatts per metre------------------------------
Mean peak wave direction------------------------------
Mean directional spread (°)------------------------------
Mean reported wave directionWSWconcentration 99%SSWconcentration 89%SSWconcentration 80%Sconcentration 68%SSWconcentration 78%SSWconcentration 87%SSWconcentration 92%SSEconcentration 88%SSEconcentration 98%SSEconcentration 97%SSEconcentration 97%SSEconcentration 97%SSEconcentration 84%SSEconcentration 78%SSEconcentration 93%SSEconcentration 76%SEconcentration 84%SSEconcentration 61%SWconcentration 91%SWconcentration 97%SSWconcentration 61%SSWconcentration 59%WSWconcentration 83%WSWconcentration 97%SWconcentration 97%SWconcentration 99%SWconcentration 96%SSWconcentration 79%SWconcentration 85%SWconcentration 99%
Mean water temperature(°C)18.018.218.218.218.118.218.318.318.318.218.118.118.118.118.118.218.218.318.518.618.518.318.218.117.917.817.917.917.917.9

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List