Skip to content
Surfhog home
Menu

K2 wave buoy daily means for Oct 2013

Daily means from the K2 wave buoy for Oct 2013, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

743 wave-buoy observations covered all 31 days. Typical wave height was 8.9 ft (10th–90th percentile 5.6–16.7 ft), while mean reported wave period; measurement type unavailable was 6.9 seconds (10th–90th percentile 5–8 seconds). Typical wind was 17.3 mph (10th–90th percentile 9.2–26.3 mph). 1 of 2,972 checked values (0%) were excluded by quality control. Across 3 comparable years, mean wave height was below the same-month mean of 11 ft and mean wave period was below the same-month mean of 7.3 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

8.9ft
Mean: 10.2 ft
P10–P90: 5.6 — 16.7 ft
Recorded extremes

3.9 — 37.4 ft

Available for 742 of 743 hourly samples

Mean Wave Period

6.9secs
P10–P90: 5 — 8secs
Recorded extremes

5 — 12secs

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 743 hourly samples

Typical Wind

SSW, 17.3mph
Mean: 17.3 mph
P10–P90: 9.2 — 26.3 mph
Recorded extremes

3.5 — 40.3 mph

Circular concentration: 40%

Compared With Previous Octobers

Historical baseline from 2,087 observations across 3 years.

Wave Height
10.2ft
0.8ft below mean
Historical mean 11ft
Wave Period
6.9s
0.4s below mean
Historical mean 7.3s
Water Temperature
–
Not enough comparable data
Historical mean 14.2°C

Chart showing grouped wave observations for K2. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About K2 wave buoy

K2 (WMO 62081) is a UK Met Office buoy in the North Atlantic west of Ireland. It provides an upstream view of ocean weather and sea conditions before systems reach Ireland and the UK. The international station feed can include wind, pressure, air and sea temperature, and wave observations when the relevant sensors are reporting.

Metrics are rows; days run left to right.
K2 wave buoy daily means Oct 2013Last observation shown
Metric
Mean wave height (ft)897568118676675111112101099109810132920141221
Mean observed period(s)7Reported6Reported6Reported5Reported5Reported7Reported7Reported7Reported6Reported6Reported6Reported5Reported6Reported6Reported8Reported7Reported8Reported7Reported7Reported7Reported7Reported7Reported8Reported6Reported7Reported7Reported11Reported9Reported8Reported7Reported10Reported
Mean wave power(kW/m)-------------------------------
Mean wind directionSEconcentration 98%Sconcentration 93%WSWconcentration 79%Wconcentration 84%SSWconcentration 98%SSWconcentration 99%SSWconcentration 92%Wconcentration 87%NNWconcentration 92%ENEconcentration 92%ESEconcentration 96%SEconcentration 95%SEconcentration 99%SEconcentration 93%SSWconcentration 61%SWconcentration 98%Sconcentration 96%Sconcentration 70%Sconcentration 86%WSWconcentration 85%ESEconcentration 49%Variableconcentration 25%SWconcentration 41%ESEconcentration 91%WNWconcentration 46%SWconcentration 93%Wconcentration 98%WNWconcentration 97%Wconcentration 75%WSWconcentration 76%WSWconcentration 98%
Mean wind speed (mph)1519131418171881314141717151519191418131814101714273030202421
Mean water temperature(°C)-------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the UK Met Office.

› Wave Buoy List