Skip to content
Surfhog home
Menu

K2 wave buoy monthly means for 2013

Monthly means from the K2 wave buoy for 2013, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

4,929 wave-buoy observations covered 221 of 365 days (61%). Typical wave height was 7.5 ft (10th–90th percentile 3.9–18 ft), while mean reported wave period; measurement type unavailable was 6.8 seconds (10th–90th percentile 5–9 seconds). Typical wind was 16.1 mph (10th–90th percentile 6.9–26.5 mph) and mean water temperature was 15.1°C (10th–90th percentile 11.8–17.7°C). 51 of 22,152 checked values (0.2%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

7.5ft
Mean: 9.4 ft
P10–P90: 3.9 — 18 ft
Recorded extremes

0 — 41 ft

Available for 4,900 of 4,929 hourly samples

Mean Wave Period

6.8secs
P10–P90: 5 — 9secs
Recorded extremes

4 — 13secs

Available for 4,909 of 4,929 hourly samples

Mean Water Temperature

15.1°C
P10–P90: 11.8 — 17.7°C
Recorded extremes

10.6 — 18.6°C

Available for 2,436 of 4,929 hourly samples

Typical Wind

WSW, 16.1mph
Mean: 16.6 mph
P10–P90: 6.9 — 26.5 mph
Recorded extremes

0 — 52.9 mph

Circular concentration: 37%

Available for 4,927 of 4,929 hourly samples

Chart showing grouped wave observations for K2. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About K2 wave buoy

K2 (WMO 62081) is a UK Met Office buoy in the North Atlantic west of Ireland. It provides an upstream view of ocean weather and sea conditions before systems reach Ireland and the UK. The international station feed can include wind, pressure, air and sea temperature, and wave observations when the relevant sensors are reporting.

Metrics are rows; months run left to right.
K2 wave buoy monthly means 2013Last observation shown
Metric
Mean wave height (ft)----97578101319
Mean observed period(s)----7Reported6Reported6Reported6Reported7Reported7Reported8Reported9Reported
Mean wave power(kW/m)------------
Mean wind direction----WNWconcentration 81%Wconcentration 38%Sconcentration 35%Wconcentration 61%Variableconcentration 21%SSWconcentration 40%WNWconcentration 39%WSWconcentration 69%
Mean wind speed (mph)----1915111517171825
Mean water temperature(°C)----11.012.616.516.915.1---

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Realtime data displayed on this page is from the Met Office Marine observations.

› Wave Buoy List