Skip to content
Surfhog home
Menu

M2 wave buoy daily means for Sep 2010

Daily means from the M2 wave buoy for Sep 2010, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

586 wave-buoy observations covered all 30 days. Typical wave height was 2.6 ft (10th–90th percentile 1.3–5.2 ft), while mean zero-crossing wave period was 4.2 seconds (10th–90th percentile 4–5 seconds). Typical wind was 16.1 mph (10th–90th percentile 9.2–24.2 mph). All 2,342 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.6ft
Mean: 3.1 ft
P10–P90: 1.3 — 5.2 ft
Recorded extremes

0.7 — 8.9 ft

Available for 585 of 586 hourly samples

Mean Observed Wave Period

4.2secs
P10–P90: 4 — 5secs
Recorded extremes

3 — 6secs

Available for 585 of 586 hourly samples

Typical Observed Wind

SSW, 16.1mph
Mean: 16.5 mph
P10–P90: 9.2 — 24.2 mph
Recorded extremes

2.3 — 33.4 mph

Circular concentration: 34%

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 586 hourly samples

Chart showing grouped wave observations for M2. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About M2 wave buoy

M2 (WMO 62091) is part of the Irish Marine Data Buoy Observation Network, managed by the Marine Institute in collaboration with Met Éireann. Moored in the Irish Sea east of Ireland, it provides open-water context for the busy, relatively enclosed waters between the Irish and British coasts.

Its current data source reports wave height, wave period, wave direction, directional spread, wind conditions and sea temperature.

Metrics are rows; days run left to right.
M2 wave buoy daily means Sep 2010Last observation shown
Metric
Mean significant wave height (ft)11223QC rejected422423455443432426321323
Mean maximum wave height (ft)------------------------------
Mean peak period (s)------------------------------
Mean zero-crossing period (s)544445444544545444444445444444
Mean peak wave direction------------------------------
Mean wave direction------------------------------
Mean directional spread (°)------------------------------
Mean wind directionEconcentration 79%Econcentration 95%SEconcentration 86%ESEconcentration 96%ESEconcentration 93%ESEconcentration 98%SSEconcentration 96%SSEconcentration 95%SWconcentration 83%Sconcentration 94%SWconcentration 86%WSWconcentration 89%SSWconcentration 96%WSWconcentration 92%WSWconcentration 94%WNWconcentration 99%WNWconcentration 96%SWconcentration 85%SSWconcentration 97%SSWconcentration 94%Sconcentration 98%Sconcentration 98%Wconcentration 69%Nconcentration 99%NNWconcentration 98%NNWconcentration 86%ENEconcentration 40%Sconcentration 96%SWconcentration 80%Sconcentration 82%
Mean wind speed (mph)6711151621151515171517222427211817181517211325161010161417
Mean water temperature(°C)------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Met Éireann Irish Marine Data Buoy Observation Network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List