Skip to content
Surfhog home
Menu

Seaford wave buoy observations on Fri, Feb 14, 2020

Hourly readings from the Seaford wave buoy for Fri, Feb 14, 2020, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 3.6 ft (10th–90th percentile 2–4.8 ft), while mean average of more than one wave period type was 7.1 seconds (10th–90th percentile 4.8–11.1 seconds). Mean water temperature was 7.8°C (10th–90th percentile 7.4–8.1°C). All 190 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Seaford. Use the detailed observations table below for the same data in text form.

About Seaford wave buoy

Seaford is a National Network Datawell Directional WaveRider in about 11 metres of water off East Sussex. First deployed on 22 January 2008, it records waves reaching Seaford Bay between Newhaven and Beachy Head and supports assessment of the town's exposed shingle frontage.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; hours run left to right. Times use your device time zone.
Seaford wave buoy hourly observations Fri, Feb 14, 2020Last observation shown
Metric
Significant wave height (ft)555554444333322222222222333334444443444444444455
Maximum wave height (ft)7777679555444333333333434445655567-5675565668788
Peak period (s)11118878798----6785111111141311121111124445555-5555555555555
Zero-crossing period (s)5555556666655555555444444444444444-4444444444444
Energy period (s)------------------------------------------------
Reported period (s)11-8-7-7-8-8-13-7-5-11-14-11-11-12-4-5-5-5-5-5-5-5-5-5-
Wave power, kilowatts per metre------------------------------------------------
Peak wave directionSWSSWSWSWSWSWSWSWSW----SWSWSWSWSWSWSSWSSSWSWSWSWSWSSWSSWSSWSWSWSWSWSW-SWSWSWSWSWSWSWSWSWSWSWSWSW
Directional spread (°)29.027.020.018.018.022.020.017.018.0----21.020.022.020.015.022.031.061.044.027.024.037.048.042.022.024.019.026.026.029.025.0-37.024.023.021.024.024.023.021.017.019.023.020.023.0
Reported wave directionSW-SW-SW-SW-SW-SW-SSW-SW-SW-SW-S-SW-SW-SSW-SSW-SW-SW-SW-SW-SW-SW-SW-SW-SW-
Water temperature(°C)7.87.87.67.57.57.47.57.57.87.97.97.97.77.37.37.37.37.37.37.47.58.08.18.28.08.08.08.08.07.97.98.08.08.08.08.18.18.28.18.18.17.98.18.18.28.28.18.0

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List